Wyze Doorbell V2 Adjustable Swivel Mount (0-35° Angle)
Compatibility: Wyze Video Doorbell V2 ONLY!
- Fits ONLY: The **Wyze Video Doorbell V2**.
- Confirm your model matches the picture below:
-
(Example Image - Click for Amazon Link. As an Amazon Associate, I earn from qualifying purchases.) - WILL NOT FIT: Wyze Video Doorbell Pro or any other Wyze models or brands.
Please double-check your Wyze model before ordering!
Fine-Tune Your Wyze V2 View with 0-35° Swivel Adjustment
Need a slight angle adjustment for your Wyze Video Doorbell V2 to capture the perfect view? This low-profile swivel mount offers precise aiming control with a **0° to 35° adjustment range**. Its versatile dual-axis joint allows fine-tuning both **horizontally (left/right) and vertically (up/down)**.
Ideal when mounted near the door on the same wall needing a subtle turn, or for minor tilt corrections on angled siding. Its compact design sits close to the wall for a clean look.
Precise Dual-Axis Control (0-35°)
Gain exact control over your camera's perspective. The smooth swivel joint enables fine adjustments across a 0° to 35° arc relative to the mounting surface, ensuring you capture precisely what matters.
Flexible Base Positioning: Mount the base plate vertically or horizontally to best suit your surface, like siding or trim. Your doorbell always remains upright.
Standard Mount Dimensions
- Base Width: 1.8 inches
- Base Height: 3.1 inches
- Base Hole Spacing: 2-5/8 inches (center-to-center)
- Total Extension (@ 0° Angle): Approx. 1.5 inches from wall (low profile)
- (Need a narrower base? See Add-ons section below!)
Key Features & Benefits:
- Perfect Fit for Wyze V2: Custom adapter bracket included specifically for the Wyze Video Doorbell V2.
- Adjustable Angle (0-35°): Provides subtle dual-axis swivel for precise aiming.
- Low-Profile Design: Minimal extension from the wall for a clean aesthetic.
- Secure Locking: Includes set screws to lock the swivel at your chosen angle.
- Wire Pass-Through: Hole in the swivel joint allows wires to pass through neatly.
- Siding Compatible: Standard base works well on flat surfaces or lapped siding up to 1.8 inches wide.
- Durable PETG Material: Strong, weather-resistant for outdoor use.
- Complete Kit: Includes adjustable base, Wyze V2 adapter bracket, and all necessary mounting/assembly screws.
- Future-Proof System: Base system allows swapping adapter brackets for future doorbell upgrades (available here).
Installing Your 0-35° Swivel Mount for Wyze V2
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), Wyze V2 wall plate & hardware.
Turn OFF power at the breaker!
-
Mount Base: Route wires through base. Position (screws vertical or horizontal) & attach using #6 screws (PH2 driver) / anchors into 2-5/8" holes.
Ensure base is level. Don't overtighten base screws.
-
Attach Swivel Bracket to Base: Route wires through bracket. Align onto base & attach using four center screws (likely #4 / PH1 driver).
Use correct PH1 bit. Start gently. Do NOT over-torque.
- Attach Doorbell Adapter Bracket to Swivel: Align the **Wyze V2 Adapter Bracket** (top plate) with the Swivel Bracket. Secure with the two side pivot screws (typically #4 / PH1), leaving slightly loose.
- Set Initial Angle (0-35°): Adjust Adapter Bracket horizontally & vertically. Lightly tighten one/two **set screws** (likely #4 / PH1 driver) on the swivel joint.
-
Attach Wyze Wall Plate: Secure the **wall plate that came WITH your Wyze V2 Doorbell** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1).
Do NOT use Wyze's wall screws here. Use correct PH1 driver.
- Wire & Mount Wyze V2: Connect wires to Wyze wall plate per Wyze instructions. Click Wyze Doorbell V2 onto its wall plate.
-
Finalize & Secure Angle: Make final angle adjustments. Fully tighten the two side **pivot screws** AND all **set screws** (likely PH1 driver) gently but firmly.
Do not overtighten set screws or pivot screws!Turn power back on and test.
Follow safety rules & Wyze guidelines. Use correct anchors/screws. Correct screwdriver size prevents stripping.
Optional Add-ons & Accessories:
Customize your installation:
-
Narrow Baseplates
Mounting on trim narrower than 1.8"? Check out our 3/4" or 1" wide baseplate adapters.
-
Large Baseplates / Cover Plates
Need to cover a larger existing hole? Contact us about custom backplate options.
-
Vinyl Siding Adapters
Achieve a secure, no-drill installation on vinyl siding with our specialized clip-on adapters.
-
Wire Extension Kit
Need longer wires? Purchase our extension wire kit with your choice of connectors.
Standard color is White (matches Wyze). Use this service for Black or other colors.
Installation Video & Examples
General installation concept video:
(Video shows general swivel mount assembly principles.)
Need Help? Confirm Compatibility & Options!
Ensure you have the Wyze Doorbell V2 (Not Pro). Need a different base or have questions?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: White (Matches Wyze). For Black or other colors, add the Color Change Request item.
Doorbell Not Included. Includes adjustable base, Wyze V2 adapter bracket, and necessary assembly/mounting screws.
Angle Note: Provides 0-35° horizontal & vertical adjustment.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order your Adjustable Angle Mount for the Wyze Doorbell V2 today to achieve the perfect viewing angle!
