Custom Intercom Cover Plate & Doorbell Mount Adapter (Made to Order)
Replace Your Old Intercom with a New Doorbell - No Patching Needed!
Have an old, bulky intercom system by your door that you want to replace with a modern video doorbell? Don't want to deal with patching and painting the large hole left behind? This **CUSTOM-MADE Adapter Plate** is the perfect solution!
HOW IT WORKS: Based on YOUR measurements and doorbell choice, we create a custom plate that:
- Covers the existing intercom opening cleanly.
- Uses the original intercom's screw holes for mounting the plate to the wall.
- Provides the correct mounting holes for your new video doorbell OR one of our standard mounting bases (Swivel, Fixed, etc.).
REQUIRED INFO (Provide in Order Notes or via Email/Text):
- 1. Intercom Hole/Box Dimensions: Height & Width of the opening you need to cover.
- 2. Existing Wall Screw Hole Spacing: EXACT center-to-center distance(s) (horizontal and/or vertical) of the screws holding the old intercom.
-
3. New Device/Mount Pattern:
- The specific **Make and Model** of your NEW video doorbell (e.g., Ring Pro 2, Nest Hello).
- OR If mounting one of our bases, specify the base type (e.g., "Standard Swivel Base", "Narrow Fixed Base") and its hole spacing (e.g., 2-5/8" or 2").
- OR Request a **blank plate** if you prefer to drill your own holes.
See the "How to Order" section below for more details. Standard sizes may be available as options, contact us for fully custom dimensions (additional cost may apply).
Modernize Your Entryway Seamlessly
Replacing outdated intercom systems (like common Nutone, M&S, Aiphone, Tektone models) often leaves unsightly large holes. This adapter plate provides a smooth transition, covering the old opening and creating a perfect mounting point for today's smart doorbells. Achieve a professional, integrated look without costly wall repairs.
Common Intercom Brands this can potentially replace cover plates for: Nutone, M&S Systems, Tektone, Aiphone, Valet, Legrand, Comelit, Linear, Holivision, and more!
How to Order Your Custom Intercom Cover Plate:
-
Measure Carefully:
- Measure the Height & Width of the existing hole/recess in your wall.
- Precisely measure the **center-to-center** distance between the screw holes used by the old intercom (Horizontal and Vertical spacing). Tip: Measure from the 1-inch mark on your tape for accuracy.
- Identify New Device/Mount: Determine the exact Make and Model of the **new** video doorbell OR the specific DoorbellMount.com base (Swivel/Fixed/etc.) you plan to install onto this plate. Note the required mounting hole pattern for this new device/base (e.g., Ring Pro 2 pattern, Standard 2-5/8" Swivel Base pattern).
-
Provide Information: When purchasing this listing (or contacting us for a custom quote), provide ALL required measurements and the new device/mount details in the "Order Notes" at checkout, or via email/text with photos.
- Example Note: "Cover Plate needed: Hole is 6"H x 4"W. Old screw holes are 4.5" vertical spacing. Need holes added to fit Ring Pro 2."
- Upload Pictures (HIGHLY Recommended): Use the upload button or email/text clear photos of your existing intercom area (with measurements if possible) and your new doorbell. This ensures the perfect custom design.
- We Design & Ship: Based on your provided specs, we'll design and print your custom cover plate adapter!
Key Features & Benefits:
- Custom-Made Cover & Adapter: Designed to your specific intercom hole dimensions and new device mounting pattern.
- Clean Intercom Replacement: Covers old openings perfectly, avoiding wall patching/painting.
- Provides Secure New Mount Point: Offers pre-drilled holes for your chosen new doorbell or DoorbellMount.com base.
- No New Wall Holes Needed: Utilizes existing intercom screw holes for wall attachment.
- Requires Your Specs: Made-to-order based on provided dimensions & device info.
- Durable PETG Material: High-quality, weather-resistant plastic.
- Integrated Wire Passthrough: Central opening allows wiring access.
- Hardware Included: Comes with small screws (#4 / PH1 likely) to attach your NEW doorbell or mount base to THIS custom plate.
- Color Options: Default Black, other colors available via add-on service.
Basic Installation Guide
Installs over your old intercom hole, providing a new mounting surface.
-
Prep & Power Off: Gather tools (screwdrivers, level), your new doorbell/mount, this custom plate, and appropriate screws/anchors for attaching the PLATE TO YOUR WALL using the old intercom holes (wall screws/anchors NOT included).
Turn OFF power to any existing wiring at the breaker!
- Remove Old Intercom: Carefully remove the old intercom unit, leaving the wires accessible if needed for a new wired doorbell.
-
Mount Custom Plate: Route necessary wires through the center of the custom plate. Align the plate's **wall-mounting holes** (custom-drilled to your old intercom's specs) over the existing holes on the wall. Secure the plate firmly using YOUR appropriate screws/anchors.
Ensure plate is level and securely fastened, covering the old opening.
-
Mount New Doorbell/Base: Attach your NEW doorbell (or the base of your DoorbellMount.com Swivel/Fixed mount) to the **front mounting holes** on the custom adapter plate, using the small screws PROVIDED WITH THIS PLATE (likely #4 / PH1 driver).
Use correct screws/driver. Tighten gently.
- Complete Installation: Wire your new doorbell (following its instructions), attach it to its bracket/base, and complete any final assembly steps.
- Final Check & Power On: Ensure everything is secure. Turn power back on and test.
Follow all safety rules & manufacturer guidelines. Selecting the correct wall fasteners for the adapter plate is crucial for secure mounting. Fit depends on the accuracy of measurements you provide.
Modernize Your Entryway
Upgrading to a sleek, new cover plate instantly refreshes the appearance of your entryway, providing a cleaner and more contemporary aesthetic compared to old intercom units.
Seamless & Compatible Fit
Our custom cover plate is specifically designed to fit your old opening while providing the correct mounting for your new doorbell or mount system, ensuring seamless integration.
Streamlined Replacement
By using a cover plate designed for retrofitting, you avoid the significant hassle and cost of repairing or patching large gaps left by the old intercom system.
Enhanced Functionality & Security
This plate enables the installation of modern video doorbells with advanced features like video, two-way talk, and smart home integration, significantly enhancing your home's security and convenience.
Durable & Reliable
Made from high-quality PETG, the cover plate offers improved durability compared to potentially brittle, aged intercom covers, ensuring a long-lasting, weather-resistant solution.
Visualization Examples
(Product is custom-made based on your details. See listing photos for general concept.)
Ready for Your Custom Plate? Questions?
We need your old hole dimensions & new device info! Unsure how to measure or need a size larger than standard doorbell dimensions? Send pictures!
- Email: shop@doorbellmount.com (Send Pics & Measurements!)
- Text/Call: 1-833-326-6868 (Text Pics & Measurements!)
Default Color: Black. For White or other custom colors, add the Color Change Request item to your order.
Custom Plate Only: This listing is for one custom-made adapter cover plate based on the information you provide. Doorbell, doorbell mount base (if used), and wall-mounting screws/anchors are NOT included.
Accuracy is Your Responsibility: The final fit depends entirely on the accuracy of the measurements and device/mount information you provide. Please double-check!
3D Printed Quality: Made using durable PETG 3D printing. Minor cosmetic variations may occur but do not affect function.
Replace your old intercom cleanly! Order your Custom Cover Plate today - remember to provide your old hole measurements AND new doorbell/mount details in the order notes!
