Corner Mount Angled 45 Degree 1in Fixed Trim Narrow/Slim Mount for Video Doorbells

$35.00
$32.50
Fixed 45° Corner Doorbell Mount (3/4" Narrow Base) | Select Your Model Designed for Corners & Slim Doorbells! Select Your Model. This mount provides a fixed **45-degree angle** and positions your doorbell approx. **1 inch forward from the corner**. Its...
Availability: Many In Stock
Product Type: Corner Mount

Fixed 45° Corner Doorbell Mount (3/4" Narrow Base) | Select Your Model

Designed for Corners & Slim Doorbells! Select Your Model.

This mount provides a fixed **45-degree angle** and positions your doorbell approx. **1 inch forward from the corner**. Its **narrow 3/4-inch base** is ideal for tight corner installations.

  • CRITICAL: You MUST Select Your Specific Doorbell Model from the options list for a perfectly matched top adapter bracket.
  • Sizing Considerations (Due to 45° Angle & Base Offset):
    • Best suited for doorbells **up to ~1.6 - 2 inches wide** (e.g., Ring Pro/Wired, Blink, Logitech, SimpliSafe, Google Nest Hello) when installed flush in a 90° corner.
    • Wider doorbells (like Ring Battery models, ~2.5" wide) **WILL** require this mount to be installed **offset from the absolute corner** (e.g., 1/4" to 1" away from one corner edge, depending on doorbell width) to fit correctly.
  • WALKWAY CLEARANCE WARNING: The 45° angle pushes the doorbell further out. On very narrow trim next to a door swing, part of the doorbell **may obstruct the walkway or be hit by the door**. Please carefully consider your space and send pictures for a fit assessment BEFORE ordering if you have any doubts.

Enhance Your Home Security with the 45° Corner Mount

Need to capture a wide view from a corner location? This **Fixed 45° Corner Mount** is designed precisely for that purpose. Its narrow 3/4" base allows installation in tight corners, while the fixed 45° angle directs your camera significantly outwards, ideal for monitoring approaches perpendicular to one of the corner walls.

It also positions the doorbell approximately 1 inch forward from the corner vertex, helping clear some trim or frame obstructions. Select your doorbell model for a secure, custom fit.

Mount Specifications

  • Fixed Angle: Provides a **45-degree horizontal angle** (angled outward from the corner).
  • Extension from Corner: Positions doorbell mounting surface approx. **1 inch forward** from the corner vertex (where walls meet).
  • Base Wall Footprint Width: 3/4 inches (0.75").
  • Base Wall Footprint Length: Approx. 2.5 inches.
  • Base Mounting Hole Spacing: Standard **2 inches** (center-to-center). (Customizable via add-on service).
  • Effective Offset: Designed for doorbells < 2" wide to fit in corner; wider doorbells require mount offset (see compatibility).

Key Features & Benefits:

  • Wide 45° Fixed Outward Angle: Maximizes view down walls from corner installations.
  • ~1" Forward Extension from Corner: Helps clear trim and improves visibility.
  • Ultra-Narrow 3/4" Base: Fits 98% of tight corners and very slim door trim.
  • Standard 2" Hole Spacing: Often matches existing doorbell button holes (customizable).
  • Requires Doorbell Model Selection: Get the correct pre-drilled top adapter bracket.
  • Internal Wire Passthrough: For a clean installation with wired doorbells.
  • Durable PETG Construction: Weather-resistant, much stronger than PLA for outdoor use.
  • Includes Assembly Screws: For connecting the adapter bracket to the mount base.
  • Future-Proof System: Top adapter bracket is replaceable if you change doorbell models (available here).

Installing Your 45° Fixed Corner Mount

  1. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), selected doorbell & its hardware.
    Turn OFF power at the breaker if hardwiring!
  2. Position & Mount Angled Base: Place the **45° Corner Base** snugly into the corner, ensuring the angle directs the doorbell correctly. Mark and drill pilot holes if needed. Secure the base to **one side** of the corner trim/wall using appropriate screws (#6 size likely, use PH2) and anchors through the 2" spaced holes.
    Ensure base is level vertically. Do NOT overtighten wall screws. Check for door swing clearance!
  3. Attach Doorbell Adapter Bracket: Route wires through the **Doorbell Adapter Bracket** (specific to your model). Align onto the angled face of the Corner Base. Attach using small screws provided (likely #4 / PH1 driver).
    Tighten screws snugly until bracket is flush. Clear plastic debris if needed.
  4. Wire Doorbell: Connect wires per manufacturer's instructions. Tuck excess wire.
  5. Attach Doorbell to Adapter Bracket:
    • Align your doorbell (or its specific backplate) with the holes on the custom Adapter Bracket.
    • Secure doorbell/plate using small screws PROVIDED WITH THIS MOUNT (likely #4 / PH1).
    • DO NOT USE doorbell's wall screws here.
    • Replace doorbell cover/faceplate.
    Use correct PH1 driver. Tighten gently.
  6. Final Check & Power On: Ensure doorbell is secure & check door clearance again. Turn power on & test.

Follow safety rules & doorbell guidelines. Use appropriate anchors. Smallest extension (~1" from corner) shipped unless custom requested (extra cost).

Perfectly Positioned with Corner Mount

The 45° Corner Mount enables installation in tight corners at a wide outward angle, ensuring optimal viewing angles. This is crucial for capturing a broad field of vision and seeing more of your entryway, especially approaches from the side.

Durable and Slim Design

The narrow 3/4" base minimizes visual clutter while fitting tight spaces. Made from robust, weather-resistant PETG, this mount stays securely in place, providing long-lasting performance and protection for your doorbell investment.

Easy Installation and Versatile Fit

Installing the Corner Mount is simple with its user-friendly design. It adapts to corners near trim or storm doors, providing a stable attachment point for many doorbell models (when selected).

Optional Add-ons & Customizations:

Enhance your installation:

  • Color Change Request Add-on
    Custom Color

    Standard Black (except SimpliSafe/Wyze default White). For other colors, add this service ($2-$5 charge applies).

    • Visualization & Installation Help

    Product Image:

    45 Degree Corner Doorbell Mount Model

    Questions? Need Fit Confirmation or Customization?

    Please send pictures of your doorbell and mounting area if you're unsure about corner fit, especially with wider doorbells or tight door clearances!

    Default Color: Black (except SimpliSafe/Wyze usually White). For other colors, add the Color Change Request item.

    Doorbell Not Included. Includes the 45° angled corner mount base, doorbell-specific top adapter bracket, and assembly screws.

    Material: Printed in durable, outdoor-rated PETG (superior to PLA).

    3D Printed Quality: While usually fantastic, minor cosmetic imperfections are inherent to 3D printing and don't affect function. We'll gladly replace if you're unhappy with quality.

    Order your 45° Fixed Corner Mount today for optimal viewing from tight corners! Remember to select your doorbell model and check sizing notes.