Add Fixed Angle and Swivel Angle Adjustment to Brick Extensions (0-35° or 15-90° Options)
Add-On Fixed Angle and Swivel Top for Brick Extension Mounts
Upgrade your existing DoorbellMount.com Brick Extension Mount (Centered or Offset) by adding full angle adjustability! This **ADD-ON** replaces the standard fixed top bracket with a complete **Adjustable Swivel Mount Top**.
- Purpose: Provides dual-axis (horizontal AND vertical) angle adjustment at the end of your brick extension.
- MUST be purchased WITH a compatible Brick Extension Mount OR for one previously bought from us. It attaches TO the end of the extension base piece.
- Select Your Angle Range: Choose either the **0-35°** (low profile) or **15-90°** (wider range with neck) swivel version from the options on this page.or fixed Angle
- This listing includes fixed angle or the swivel base, swivel bracket, model-specific doorbell adapter plate, and necessary assembly screws. It does NOT include the main brick extension base piece.
Need Both Extension AND Angle Adjustment?
Does your installation require bringing your doorbell forward past brick (using one of our Brick Extensions) AND also precise angle adjustment (left/right or up/down)? This Swivel Angle Adapter Top provides the perfect solution!
Simply add this item to your cart along with the desired Brick Extension base (or order it for a base you already have). Select the angle range (0-35° for fine-tuning, 15-90° for significant angles like sidewalls) and your doorbell model. You'll get a complete assembly that offers both extension and full swivel adjustability.
Dual-Axis Swivel Control (Select Your Range)
Gain complete control over your doorbell's final viewing angle. The included swivel joint allows fluid adjustment up, down, left, or right.
- 0-35° Option: Low-profile design for subtle angle corrections.
- 15-90° Option: Includes a neck for clearance, allowing wider angles, including turning perpendicular to the mounting direction – ideal for sidewall extensions.
Lock your perfect angle securely with the integrated set screws.
Key Features & Benefits:
- Adds Swivel to Brick Extensions: Upgrades a fixed extension mount to full angle adjustability.
- Replaces Standard Top Bracket: Seamlessly integrates with the DoorbellMount.com Brick Extension base system.
- Dual-Axis Adjustment: Provides both Horizontal (Left/Right) and Vertical (Up/Down) aiming.
- Two Angle Ranges Available: Choose 0-35° (low profile) or 15-90° (wide angle w/ neck) via listing options.
- Requires Doorbell Model Selection: Ensures the top bracket fits your specific doorbell.
- Secure Locking: Set screws included to fix the desired angle.
- Durable PETG Material: Weather-resistant for outdoor use.
- Color Matched: Matches the color of the Brick Extension ordered (Default Black).
- Includes Swivel Assembly & Hardware: Comes with swivel base, swivel bracket, model-specific top plate, and assembly screws.
How to Install (Brick Extension Base + This Swivel Top)
This swivel assembly attaches to the end of your Brick Extension Base.
-
Tools & Prep: Gather Brick Extension Base, this Swivel Top assembly, drill, PH1 & PH2 drivers/bits, anchors (if needed), level.
Turn OFF power at the breaker if wiring!
-
Mount Brick Extension Base: Install the **Brick Extension Base** piece (correct length/offset) to your wall/trim per its instructions (using #6/PH2 screws likely).
Ensure base is level & secure. Don't overtighten.
-
Attach Swivel MOUNT BASE OR FIXED ANGLE to Extension Base: Align the base piece of **this Swivel Top assembly** onto the front of the mounted Extension Base. Secure it using the screws provided for this connection (likely #4 / PH1 driver - confirm screw type provided with this add-on).
Tighten snugly to connect swivel base to extension base. Avoid overtightening.
-
Attach Swivel BRACKET to Swivel Base: Route wires through the swivel bracket. Attach it to the swivel base using the four small center screws provided (likely #4 / PH1 driver).
Use correct PH1 bit. Tighten until flush. Do NOT over-torque.
- Set Initial Angle: Adjust swivel bracket (up/down & left/right) within your selected range (0-35° or 15-90°). Lightly tighten one/two **set screws** (likely #4 / PH1 driver).
-
Wire & Attach Doorbell: Connect wires. Attach your specific doorbell model to the top bracket of the swivel using the mount-provided screws (likely #4/PH1). Follow specific instructions for your doorbell (e.g., using its backplate if required).
Use screws PROVIDED WITH THE MOUNT for doorbell attachment. Do NOT use doorbell manufacturer's wall screws.
-
Finalize Angle & Secure: Make final angle adjustments. Fully tighten all **set screws** (likely PH1 driver) gently but firmly.
Do not overtighten set screws!Turn power back on and test.
Follow safety rules & wiring guidelines. Use correct drivers & anchors.
Product Visualization
(15-90 degree version shown in example image below)
Questions About Options or Compatibility?
Unsure which angle range (0-35° or 15-90°) is best? Need help selecting your doorbell model or confirming compatibility with your brick extension base?
- Email: shop@doorbellmount.com (Send pictures!)
- Text/Call: 1-833-326-6868 (Text pictures!)
Color Information: This swivel top will match the color selected for your main Brick Extension order (default Black). For other colors, add the Color Change Request.
Add-On Swivel Top Only: This listing is for the Adjustable Swivel Top assembly (swivel base, swivel bracket, model-specific top plate) ONLY. The Brick Extension base piece must be purchased separately or owned previously.
3D Printed Parts: Crafted using 3D printing (PETG). Minor cosmetic variations inherent to printing may exist but do not impact function. Contact us with quality concerns before reviewing.
Upgrade your Brick Extension Mount with full angle adjustability! Select your desired angle range (0-35° or 15-90°) and doorbell model when adding this item to your order.
